注射用水在線TOC監測儀 產品特點

1.儀器采用便攜設計，使用輕便，方便移動至取樣點。

2.采用嵌入式系統，觸摸屏設計，純中文操作方便簡易。

3.針對制藥用水（TOC含量在1000ppb以下）總有機碳含量的檢測設計，進行檢測。

4.配備大量的儲存空間，能夠存儲大量的測試數據。

5.中文打印，輸出測試參數、測試結果。

6.在使用、貯存和更換過程中不需要氣體或試劑，無移動部件，減少維修和維護成本。

7.當測試樣品濃度超過規定限度，儀器能夠自動報警，并輸出控制信號。

8.符合國家2010版《中國藥典》規定的測試方案，可以提供 IQ/OQ/PQ 服務。

注射用水在線TOC監測儀   Product features

1. The instrument adopts portable design, easy to use and convenient to move to the sampling point.

2. The embedded system and touch screen design are adopted, and the pure Chinese operation is convenient and simple.

3. For the detection design of total organic carbon content of pharmaceutical water (TOC content is below 1000ppb), the detection is carried out.

4. A large amount of storage space is provided to store a large amount of test data.

5. Print in Chinese and output test parameters and results.

6. No gas or reagent is required during use, storage and replacement, and there are no moving parts, reducing repair and maintenance costs.

7. When the concentration of test sample exceeds the specified limit, the instrument can automatically alarm and output control signal.

8. It conforms to the test scheme specified in the Chinese Pharmacopoeia (2010) and can provide IQ/OQ/PQ services.

使用與操作方法

開始檢測并計入檢測次數，檢測完畢后顯示最后一次檢測結果，其中幾次檢測的結果均自動保存在查詢記錄當中。檢測次數的設置方式為：用“選擇”鍵移動光標，用“設置”鍵修改數字，按“確定”鍵進行確認，進入分析界面。先進行四次沖洗過程

Scope of application

The instrument can be used to detect the concentration of organic carbon in purified water, water for injection and deionized water in the pharmaceutical industry; It can also be used for the detection of ultra pure water TOC in the semiconductor industry.

應用范圍

該儀器可用于檢測制藥工業中純化水、注射用水和去離子水中有機碳的濃度；也可用于半導體行業中超純水TOC的檢測。

在制藥領域和生物化學領域清潔驗證過程中，可用于驗證清潔效果。

該儀器具有在線檢測功能，可以在線監測制藥工業的制水系統、半導體工業的超純水制備系統和晶片工藝過程、電廠去離子水制備過程等。

It can be used to verify the cleaning effect in the cleaning validation process in the pharmaceutical and biochemical fields.

The instrument has the online detection function, which can monitor the water preparation system of the pharmaceutical industry, the ultra pure water preparation system of the semiconductor industry, the wafer process, the deionized water preparation process of the power plant, etc.

TOC運行要求

1交流電源：170～260 V，頻率：50/60 Hz；

2分析儀的量程是：電導率< 10.0 us/cm；TOC < 1.0 PPM。如果水樣中的無

機碳或有機碳濃度超出了儀器的檢測范圍，需使用高純水或有機碳濃度較

低的去離子水沖洗管路。

3儀器運行的環境溫度5℃ – 40 ℃。

Use and operation methods

Start the test and count the test times. After the test, the last test result will be displayed. The results of several tests will be automatically saved in the query record. The setting method of detection times is: move the cursor with the "Select" key, modify the number with the "Set" key, press the "OK" key to confirm, and enter the analysis interface. First, carry out four flushing processes

TOC operation requirements

1 AC power supply: 170～260 V, frequency: 50/60 Hz;

2. The range of the analyzer is: conductivity<10.0 us/cm; TOC < 1.0 PPM。If there is no

The concentration of organic carbon or organic carbon exceeds the detection range of the instrument, so it is necessary to use high-purity water or organic carbon

Flush the pipeline with low deionized water.

3 The ambient temperature for the operation of the instrument is 5 ℃ – 40 ℃.

二氧化碳傳感器

儀器上安裝有兩個二氧化碳傳感器，由電導率傳感器和溫度傳感器組成。電導率測量采用雙精度技術，可以實現自動校準和溫度補償。TIC傳感器用于檢測未經氧化的水樣中二氧化碳濃度，同時檢測水樣的電導率值；TC傳感器用于檢測水樣本身含有的二氧化碳和水樣中有機物經分解后產生的二氧化碳濃度的總和。

Carbon dioxide sensor

There are two carbon dioxide sensors installed on the instrument, which are composed of conductivity sensor and temperature sensor. Conductivity measurement adopts double precision technology, which can realize automatic calibration and temperature compensation. The TIC sensor is used to detect the concentration of carbon dioxide in the water sample without oxidation, as well as the conductivity value of the water sample; TC sensor is used to detect the sum of the carbon dioxide contained in the water sample itself and the carbon dioxide concentration generated after the decomposition of organic matters in the water sample.

在線分析

將TOC分析儀安置于純水系統的支管或出水管處，對特定點進行實時、連續、在線監測。在線檢測可方便對水系統的質量進行實時測定并可以對水系統進行實時流程控制，同時可以在第一時間發現水系統的故障。

on-line analysis

Place the TOC analyzer at the branch pipe or outlet pipe of the pure water system, and conduct real-time, continuous and online monitoring at specific points. Online detection can facilitate real-time measurement of the quality of the water system and real-time process control of the water system, and can detect the fault of the water system at the first time.

離線分析

將TOC分析儀放置于實驗室操作臺上，測試時，在系統的各取樣點取樣后進行分析的方法。其優點是可以使用一臺儀器對不同取樣點的樣品進行檢測分析。缺點是會被取樣、采樣容器以及未受控的環境因素等污染，造成測試結果會與實際樣品有偏差。藥典中規定：由于水的生產是批量進行和連續操作的，所以在選擇采用離線測定還是在線測定時，應根據水生產的條件和具體情況決定。

Offline analysis

Place the TOC analyzer on the laboratory console, and conduct analysis after sampling at each sampling point of the system during the test. Its advantage is that it can use one instrument to detect and analyze samples at different sampling points. The disadvantage is that it will be polluted by sampling, sampling containers and uncontrolled environmental factors, resulting in deviation between the test results and the actual samples. It is stipulated in the pharmacopoeia that since the production of water is batch and continuous, the choice of offline or online measurement should be determined according to the conditions and specific conditions of water production.

主要產品有：

萬能試驗機，                     塑料球壓痕硬度計

維卡熱變形試驗儀，               體積表面電阻率測試儀

海綿泡沫落球回彈試驗機，         海綿泡沫拉伸強度試驗機

耐壓試驗機，                 介電常數測試儀

海綿泡沫壓陷硬度測驗儀，         介質損耗測試儀

海綿泡沫切割機，                 啞鈴制樣機

海綿泡沫疲勞壓陷試驗機，         薄膜沖擊試驗機

熔融指數儀，                     無轉子硫化儀

電壓擊穿試驗儀，                 摩擦系數儀

低溫脆性沖擊試驗儀               阿克隆磨耗試驗機等。

工作位置：工作站的位置選擇必須安排在一般人員非必經的處所，使非工作人員選離工作站。如果因為條件限制的安排而無法做到時，必須將工作站與其這它設施隔開并且特別標明“測試工作站”。如果工作站與其它作業站非常接近時，必須特別注意安全的問題。在測試時必須標明“測試執行中，非工作人員請勿靠近”