橡膠高壓漏電起痕試驗機  特點：

試驗儀由試驗部分和控制部分組成采用一體化設計，方便現場安裝和調試。試驗箱外殼及結構件采用S304不銹鋼或黃銅制造；電極頭為不銹鋼，耐高溫耐腐蝕；滴液計數準確，控制系統穩定可靠。

橡膠高壓漏電起痕試驗機  技術參數
1.控制方式:PLC觸摸屏(臺灣威綸7寸彩屏)；

2.操作類型：無線電子搖控；

3.電極材料：銅 鉑金；

4.每個電極對試樣作用力：1.0?0.05N；

5.液滴時間：30s?0.1s；

6.施加電壓：100～600V（48～60Hz）之間可調，短路電流在1.0?0.1A時電壓下降不超過10%；

7.滴液裝置：試驗時不需要調整；

8.滴液高度：30～40mm；

9.滴液大小：44～55滴/1cm?

10.控制液滴采用電磁閥,精確的控制液滴的大小,20滴精度最大可達到0.02g；

11.判斷回路：短路電流大于0.5A時間維持2秒鐘繼電器動作，切斷電流，指示試品不合格；

12.內部容積：0.5m3（可選購0.75m3或1m3）；

13.外部尺寸: 寬1170mm*深630mm*高1330mm；

14.箱體材料：鐵板噴涂；

15.排氣孔：?100mm；

16.工作電源：AC 220V/50HZ/10A。

1、漏電起痕試驗儀在操作過程中，人員應該注意個人防護，避免漏電受傷或被溶液沾染到口、眼部位造成傷害

2、輸入電源AC220?2%。

3、排氣管應通出窗外。

4、在對樣品進行時,請勿打開倉門,待試驗完之后或當實驗失效產生火煙時，先打開風扇排除煙霧后，再打開倉門進行作業。

5、實驗前須確認設備是否在計量有效期內，如超期則不能進行實驗

6、電源應用有地線的三極插座，保證接地可靠。

characteristic:

The testing instrument consists of an experimental part and a control part, designed in an integrated manner for easy on-site installation and debugging. The outer shell and structural components of the test chamber are made of S304 stainless steel or brass; The electrode head is made of stainless steel, which is resistant to high temperature and corrosion; Accurate droplet counting and stable and reliable control system.

technical parameter

1. Control method: PLC touch screen (Taiwan Weilun 7-inch color screen);

2. Operation type: wireless electronic remote control;

3. Electrode material: copper platinum;

4. Force exerted by each electrode on the sample: 1.0?0.05N;

5. Droplet time: 30s?0.1s;

6. Applied voltage: adjustable between 100-600V (48-60Hz), with a voltage drop of no more than 10% when the short-circuit current is 1.0?0.1A;

7. Dropping device: No adjustment is required during the experiment;

8. Drop height: 30-40mm;

9. Drop size: 44-55 drops/1cm?

10. Electromagnetic valves are used to control the droplet size accurately, with a maximum precision of 0.02g for 20 droplets;

11. Circuit judgment: If the short-circuit current is greater than 0.5A, the relay will operate for 2 seconds to cut off the current and indicate that the test sample is unqualified;

12. Internal volume: 0.5m3 (optional 0.75m3 or 1m3);

13. External dimensions: width 1170mm * depth 630mm * height 1330mm;

14. Box material: Iron plate spray coating;

15. Exhaust hole: ? 100mm;

16. Working power supply: AC 220V/50HZ/10A.

matters needing attention

1. During the operation of the leakage trace tester, personnel should pay attention to personal protection to avoid injury caused by leakage or contamination of the mouth and eyes by the solution

2. Input power supply AC220?2%.

3. The exhaust pipe should lead out of the window.

4. When testing the sample, do not open the chamber door. After the test is completed or when the test fails and smoke is generated, turn on the fan to eliminate the smoke first, and then open the chamber door for operation.

5. Before conducting the experiment, it is necessary to confirm whether the equipment is within the valid measurement period. If it exceeds the period, the experiment cannot be carried out

6. The power supply should use a three pole socket with a grounding wire to ensure reliable grounding.

 北廣產品銷往北京、上海、廣東、河南、浙江、河北、江蘇、湖南、內蒙、山東、四川、廣州、江西、西北、云南、深圳、吉林、南京、嘉興、佛山、蘇州、杭州、西安、潥陽、長春、江蘇、平頂山、安徽、金水、金華、海南、廊坊、天津、成都、揚州、東莞、濟南、南通、株洲、保定、貴州、宜興、嘉興、黑龍江、漳州、成都、重慶、咸陽、濟南、紹興、杭州、拉薩、山西、惠州、滄州、江西、沈陽、武漢、沈陽、昆明、鶴山、許昌、青海、寧波、醴陵、淄博、瑞安、阜新、合肥、長沙、常州、瑞安、青島、無錫、濟寧、醴陵、廈門、河源、樂清、煙臺、福州、龍口、徐州、唐山等地銷售。

 售后服務
一、安裝調試：協助試驗機的安裝，負責試驗機的運輸、調試。
二、驗收標準：試驗機按訂貨技術附件進行驗收。終驗收在買方進行，對用戶提供的試樣進行試驗，并提供測試報告。
三、培訓：安裝調試同時，在儀器操作現場一次性免費培訓操作人員2-3名，該操作人員應是由需方選派的長期穩定的員工，培訓后能夠?qū)υO(shè)備基本原理、軟件使用、操作、維護事項理解和應用，使人員能夠獨立操作設備對樣品進行檢測、分析，同時能進行基本的維護。
四、軟件升級：終生免費提供新版本控制軟件。